Product Details
Company web; Http//www.qdxkjx.comApplication;This machine is used to clean the rust on tanker body inner&outer surface loading 60t and 120t.After various tankers are cleaned through blast chamber, Its outside surface adhered abrasive more than 98%. The oxide-scale, impurity and dust on outer&inner wall are cleaned out, appear the real metal material of tanker body shell. The process shot blasting could eliminate the stress concentration of metal, and improve anti-fatigue performance. Besides, the roughness of metal surface get more even, improve the adhesion of coatings, prolong coating life.
Advantages;1. Blasting Chambers and the arrangement of blasting wheel have been confirmed after the computer three-dimensional dynamic simulation of projectile. The tanker located best position to clean, the inner&outer of tanker could be cleaned clearly.
2. It adopts straight drawing device, the tanker goes into blasting area by straight line, reduce assistant time and improve blast wheel effective.
3. Introducing Switzerland + GF + DISA company technology, motor adopt famous brand domestic, ensure blast wheel's technology and quality.
4. Blades are quickly to be removed and installed: the blades do not need any screws, pins, spring clamp or other fixture. We directly insert the blades from the center to the impeller channel, when the blades are rotating, the creative centrifugal force and the two convex can be relied on to fix the blades, 5. so we do not need any fixture. High effective; the machine's parameters are design optimal, reduce energy consumption 5-10%. Effective is more than 16-20kg/min.kw.
6.The bag type dust collector is adopted, efficiency can reach more than 99.9%, workshopt dust contain ≤10mg/m3 and dust emission acuities were ≤120 mg/m3.
7.The system is divided into two types of manual and automatic way to work, use PLC controller and frequency conversion speed governor, equip with time adjustment, blast wheel capacity displayer. o make the equipment run safely and reliably, on the electrical system of this system is equipped with the following interlocking:
Parameters;
Productivity |
60 |
min/unite |
Surface roughness |
Sa2 |
|
Abrasive coverage |
≥ 99% |
|
Blast wheel qty |
18 |
unite |
Blast wheel capacity |
120x18 |
kg/min |
Blast wheel power
|
7.5x18 |
kw |
Consumption |
8 |
m³/h |
Pressure |
0.5-0.7 |
Mpa |
Noise |
meet Chinese standard |
Dust emission conentration |
≤120 |
mg/m3
|
Dust
|
≤10
|
mg/m3 |
Tanker max size |
21000x3200x4500 |
mm |
Max weight of tanker |
30 |
t |
Drawing device power |
7.5 |
kw |
Dustcollector air volume |
68000 |
m³/h |
Total power |
290 |
Kw |
Packing;
plywood box or nude packing
Aftersale service;
1.Our quality guarantee time is one year
2.The exwork product is good quality and has stable performance.
3.Sand mixer in the process of using, appear quality problem, after the user notice, give a written reply within 24 hours or send service personnel leaving the factory, and the fault does not exclude the service personnel do not leave the scene.
4.In guarantee time, if there is any problem happens to the machine by normal operation, not because of artificial damage, supplier is responsible to change the broken parts without any charge, but the easily wear spare parts are not included.
5.The seller supplies spare parts for the machine they sold. The seller has a sufficient inventory warehouse.