Product Details
1.Use modular design, reduced the occupation area and it's easy to change spare parts
2.Use the linear type structure, slider hot-pressed and made of the special material
3.The mouth of the annular stainless steel clamping device and integral aluminum alloy cooling device, protect the bottleneck heating deformation, improve the bottle and the bottle cap
sealing, prolong the life of the contents
4.The groups of infrared lamp independent thermal balance adjusting device of the bottle blank heating when the temperature uniformity and the bottle exterior color uniform, improve the rate of finished products
5.If you take a blow can debug function of large flow two stage blowing device
6.Adopted photoelectric control pre-blowing and blowing settings, the time is not affected by pressure fluctuations up to the bottle on wall thickness uniformity and consistency
 |
 |
|
Model |
Unit |
AOK-2000
Standar
|
Clamping System |
（Number of cavity） |
cavities |
2 |
（clamping unit） |
KG |
20000 |
（mold stroke） |
mm |
130 |
（stretch stroke） |
mm |
320 |
(Bottom stroke) |
mm |
30 |
(Cavity pitch) |
mm |
120 |
(heating pitch) |
mm |
55 |
(Number of holder) |
PCS |
64 |
|
(Max.container volume) |
ltr |
2 |
(Max. neck diameter) |
mm |
32/38 |
Max.prefrom height |
mm |
140 |
Max.container diameter |
mm |
105 |
Max.container height |
mm |
320 |
theoretical output |
B.P.H |
2000-2100 |
Electrical System |
heating oven |
UNITS |
2 |
box*channel |
2*9 |
Number of lamp |
pcs |
18 |
heating power |
KW |
21.6 |
installed power |
KW |
25.5 |
voltage |
Voltage |
220v/380V/3phase |
Air System |
operating pressure |
kg/cm2 |
7 |
blowing pressure |
mpa |
3.5 |
high pressure air consuming |
M3/min |
2.0 |
power |
KW |
2.4 |
Chiller System |
temperature |
°C |
10-15 |
pressure |
Mpa |
0.3-0.5 |
flow rate |
L/min |
40 |
heating power |
HP |
4 |
Machine |
L×W×H
machine dimension
|
M |
2.6*1.8*1.8 |
(chine weight |
KG |
3500 |
http://www.aoktac.net/
Company Profile
